Material Safety Data Sheet AggreBind
Section 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier.
Product name: AGB-WT
Synonyms: AQUEOUS POLYMER DISPERSION
1.2 Relevant indentified uses of the substance of mixture and uses advised against.
1.3 Details of the supplier of the safety data sheet.
Company Names:
AggreBind Inc.
28 Rock View Terrace, New Haven
Connecticut, 06511, US
Email:robert@aggrebind.com
don@aggrebind.com
Website: www.aggrebind.com
1.4 Emergency telephone number.
US +1-203-785-1808
UK +44-1283-585177
Section 2: Hazards identification
2.1 Classification of the substance or mixtures.
Classification under CHIP: This product has no classification under CHIP.
2.2 Label elements under CHIP: This product has no classification under CHIP.
Hazard symbols: No significant hazard.
2.3 Other hazards.
PBT: This substance is not identified as a PBT substance
Section 3: Composition/information on ingredients
3.2 Mixtures.
Section 4: First aid measures
4.1 Description of first aid measures.
Skin contact: Wash immediately with plenty soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Do not induce vomiting. Wash out mouth with water. If conscious, give half a of water to drink immediately. Consult a doctor.
4.2 Most important symptoms and effects, both acute and delayed.
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be mild irritation of the throat.
Inhalation: There may be irritation of the throat
With a feeling of tightness of the chest.
4.3 Indication of any immediate medical attention and special treatment needed Immediate/special treatment: Not applicable.
Section 5: Fire fighting measures
5.1 Extinguishing media.
Extinguishing media: Water spray. Alcohol or polymer foam. Carbon dioxide. Dry chemical powder.
5.2 Special hazards arising from the substance or mixture.
Exposure hazards: In combustion emits toxic fumes.
5.3 Advice for fire-fighters: Wear self-contained breathing apparatus.
Wear protective clothing to prevent contact with skin and eyes.
Section 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures. Personal precautions: Refer to section 8 of the SDS for personal protection details. Turn leaking containers leak-side up to prevent escape of liquid.
6.2 Environmental precautions.
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3 Methods and material for containment and cleaning up.
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
6.4 Reference to other sections.
Reference to other sections: Refer to section 8 of SDS
Section 7: Handling and storage
7.1. Precautions for safe handing.
Handling requirements: Ensure that there is sufficient ventilation of the area.
7.2 Conditions for safe storage, including any incompatibilities.
Storage conditions: Store in cool, well ventilated area. Keep container tightly closed.
Suitable packaging: Stainless steel, Polyethylene. Coated steel.
7.3 Specific end use(s): No data available.
Section 8: Exposure controls/personal protection
8.1 Control parameters.
Workplace exposure limits: Not applicable.
8.2 Exposure controls.
Respiratory protection: Respiratory protection not required
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.
Section 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties.
State: Liquid
Colour: White
Odour: Characteristic odour
Evaporation rate: Slow
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Miscible
Viscosity: Non-viscous
Boiling point/range: 100oC
Relative density: 1.05@20oC
pH: 7.7- 8.3
9.2. Other information.
Other information: Not applicable.
Section 10: Stability and reactivity
10.1 Reactivity.
Reactivity: Stable under recommended transport or storage conditions.
10.2 Chemical stability.
Chemical stability: Stable under normal conditions.
10.3 Possibility of hazardous reactions.
SAFETY DATA SHEET
Compilation date 03.15.2015
Revision No: 1a
Hazardous reactions: Hazardous reactions will not occur under Normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4 Conditions to avoid: Heat. Direct sunlight.
10.5 Incompatible materials.
10.6 Hazardous decomposition products: In combustion emits toxic fumes.
Section 11: Toxicological information
11.1 Information on toxicological effects.
Toxicity values: Not applicable.
Symptoms/routes of exposure.
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be irritation of the throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest.
Section 12: Ecological information
12.1 Toxicity.
Exotoxicity values: Not applicable
12.2 Persistence and degradability.
Persistence and degradability: Not biodegradable.
12.3 Bioaccumulative potential.
Bioaccumulative potential: No data available.
12.4 Mobility in soil.
Mobility: Non-volatile.
12.5 Results of PBT and vPvB assessment.
PBT identification: This substance is not identified as a PBT substance.
12.6 Other adverse effects.
Other adverse effects: No data available.
Section 13: Disposal considerations
13.1: Waste treatment methods
NB: The users attention is drawn to the possible existence of regional, or national regulations regarding disposal
Section 14: Transport information
Transport class: This product does not require a classification for transport.
Section 15: Regulatory information
15.1: Safety, health and environmental regulations/legislation specific for the substance or mixture.
15.2: Chemical Safety Assessment.
Chemical safety assessment: A local chemical safety assessment may be required.
Section 16: Other information
Legal disclaimer:
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling of or from contact with the above product.
Section 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier.
Product name: AGB-BT
Synonyms: AQUEOUS POLYMER DISPERSION
1.2 Relevant indentified uses of the substance of mixture and uses advised against.
1.3 Details of the supplier of the safety data sheet.
Company Names:
AggreBind Inc.
28 Rock View Terrace, New Haven
Connecticut, 06511, US
Email:robert@aggrebind.com
don@aggrebind.com
Website: www.aggrebind.com
1.4 Emergency telephone number.
US +1-203-785-1808
UK +44-1283-585177
Section 2: Hazards identification
2.1 Classification of the substance or mixtures.
Classification under CHIP: This product has no classification under CHIP.
2.2 Label elements under CHIP: This product has no classification under CHIP.
Hazard symbols: No significant hazard.
2.3 Other hazards.
PBT: This substance is not identified as a PBT substance
Section 3: Composition/information on ingredients
3.2 Mixtures.
Section 4: First aid measures
4.1 Description of first aid measures.
Skin contact: Wash immediately with plenty soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Do not induce vomiting. Wash out mouth with water. If conscious, give half a of water to drink immediately. Consult a doctor.
4.2 Most important symptoms and effects, both acute and delayed.
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be mild irritation of the throat.
Inhalation: There may be irritation of the throat
With a feeling of tightness of the chest.
4.3 Indication of any immediate medical attention and special treatment needed Immediate/special treatment: Not applicable.
Section 5: Fire fighting measures
5.1 Extinguishing media.
Extinguishing media: Water spray. Alcohol or polymer foam. Carbon dioxide. Dry chemical powder.
5.2 Special hazards arising from the substance or mixture.
Exposure hazards: In combustion emits toxic fumes.
5.3 Advice for fire-fighters: Wear self-contained breathing apparatus.
Wear protective clothing to prevent contact with skin and eyes.
Section 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures. Personal precautions: Refer to section 8 of the SDS for personal protection details. Turn leaking containers leak-side up to prevent escape of liquid.
6.2 Environmental precautions.
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3 Methods and material for containment and cleaning up.
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
6.4 Reference to other sections.
Reference to other sections: Refer to section 8 of SDS
Section 7: Handling and storage
7.1. Precautions for safe handing.
Handling requirements: Ensure that there is sufficient ventilation of the area.
7.2 Conditions for safe storage, including any incompatibilities.
Storage conditions: Store in cool, well ventilated area. Keep container tightly closed.
Suitable packaging: Stainless steel, Polyethylene. Coated steel.
7.3 Specific end use(s): No data available.
Section 8: Exposure controls/personal protection
8.1 Control parameters.
Workplace exposure limits: Not applicable.
8.2 Exposure controls.
Respiratory protection: Respiratory protection not required
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.
Section 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties.
State: Liquid
Colour: Black
Odour: Characteristic odour
Evaporation rate: Slow
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Miscible
Viscosity: Non-viscous
Boiling point/range: 100oC
Relative density: 1.05@20oC
pH: 7.7- 8.3
9.2. Other information.
Other information: Not applicable.
Section 10: Stability and reactivity
10.1 Reactivity.
Reactivity: Stable under recommended transport or storage conditions.
10.2 Chemical stability.
Chemical stability: Stable under normal conditions.
10.3 Possibility of hazardous reactions.
SAFETY DATA SHEET
Compilation date 03.15.2015
Revision No: 1a
Hazardous reactions: Hazardous reactions will not occur under Normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4 Conditions to avoid: Heat. Direct sunlight.
10.5 Incompatible materials.
10.6 Hazardous decomposition products: In combustion emits toxic fumes.
Section 11: Toxicological information
11.1 Information on toxicological effects.
Toxicity values: Not applicable.
Symptoms/routes of exposure.
Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be irritation of the throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest.
Section 12: Ecological information
12.1 Toxicity.
Exotoxicity values: Not applicable
12.2 Persistence and degradability.
Persistence and degradability: Not biodegradable.
12.3 Bioaccumulative potential.
Bioaccumulative potential: No data available.
12.4 Mobility in soil.
Mobility: Non-volatile.
12.5 Results of PBT and vPvB assessment.
PBT identification: This substance is not identified as a PBT substance.
12.6 Other adverse effects.
Other adverse effects: No data available.
Section 13: Disposal considerations
13.1: Waste treatment methods
NB: The users attention is drawn to the possible existence of regional, or national regulations regarding disposal
Section 14: Transport information
Transport class: This product does not require a classification for transport.
Section 15: Regulatory information
15.1: Safety, health and environmental regulations/legislation specific for the substance or mixture.
15.2: Chemical Safety Assessment.
Chemical safety assessment: A local chemical safety assessment may be required.
Section 16: Other information
Legal disclaimer:
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling of or from contact with the above product.
AggreBind soil stabilizer is a unique, environmentally friendly, cross-linking, water based, styrene acrylic polymer with proprietary tracers. Further to the Material Safety Data Sheet AggreBind is available in a wide range of colors to produce soil stabilized roads from in-situ materials and for the manufacturing of blocks, bricks and pavers, for buildings and homes without using any cement.
Mais informações sobre o estabilizador de solo AggreBind, clique nos links abaixo:
Technical Information
Easy Way To Calculate Current Moisture Content And Optimum Moisture Content of Soils And Sand
Pre-Installation Evaluation Form
Specifications of AggreBind Polymer
Soil Stabilizing Analysis by Weight of Soil Treated and soil Triangle
Construction Materials Evaluation
AggreBind Project Analysis
Assessment and Application Guidelines
Ideal Soil Configuration
Check List for Installation of AggreBind
Procedures AggreBind Quality and Quantity Evaluation